Electric Screwdrivers SEHAN – SD series Features
- Profile of fastening process
- Counter setting
- Multi sequence setting (SDC setting)
- Driver ++ setting
- Real time monitoring data
- Real time monitoring CURVE (Speed vs Torque or Anglue vs Torque)
- Screw counter-single
Screwdriver
Specification
| Model | Torque (kgf.cm) |
Speed (rpm) |
Bit Type | Weight (kg) |
Rated Voltage |
Controller |
|---|---|---|---|---|---|---|
| SD070 | 0.1 ~ 0.7 | 340 ~ 930 | E (only D-cut) | 0.26 | DC 24V | SDC-24 |
| SD120 | 0.3 ~ 1.5 | 240 ~ 1,000 | E (only D-cut) | 0.26 | ||
| SD200 | 0.5 ~ 2.0 | 420 ~ 1,000 | A, E (only D-cut) | 0.29 | ||
| SD300 | 1.0 ~ 3.0 | 360 ~ 890 | A, E (only D-cut) | 0.29 | ||
| SD600 | 1.5 ~ 6.0 | 190 ~ 710 | A, E (only D-cut) | 0.33 | ||
| SD1000 | 2.0 ~ 10.0 | 130 ~ 430 | A, E (only D-cut) | 0.38 | ||
| SD1500 | 3.0 ~ 15.0 | 120 ~ 400 | A | 0.38 | ||
| SD05N | 1.0 ~ 5.0 | 400 ~ 1,000 | A, E (only D-cut) | 0.64 | DC 40V | SDC-40 |
| SD09N | 1.5 ~ 9.0 | 300 ~ 1,000 | A, E (only D-cut) | 0.65 | ||
| SD18N | 4.0 ~ 18 | 300 ~ 900 | A | 0.75 | ||
| SD28N | 5.0 ~ 28 | 190 ~ 780 | A | 0.75 |
-
Automation Type
| Model | Torque (kgf.cm) |
Speed (rpm) |
Bit Type | Weight (kg) |
Rated Voltage |
Controller |
|---|---|---|---|---|---|---|
| SDA120 [Straight] | 0.3 ~ 1.5 | 400 ~ 1,000 | E (only D-cut) | 0.46 | DC 24V | SDC-24 |
| SDA200 [Straight] | 0.5 ~ 2.0 | 420 ~ 1,000 | E (only D-cut) | 0.46 | ||
| SDA300 [Straight] | 1.0 ~ 3.0 | 360 ~ 890 | E (only D-cut) | 0.46 | ||
| SDA600 [Straight] | 1.5 ~ 6.0 | 190 ~ 710 | A | 0.46 | ||
| SDA1000 [Straight] | 2.0 ~ 10.0 | 130 ~ 430 | A | 0.67 | ||
| SD120Z [Offset] | 0.3 ~ 1.5 | 400 ~ 1,000 | E (only D-cut) | 0.46 | ||
| SD200Z [Offset] | 0.5 ~ 2.0 | 420 ~ 1,000 | E (only D-cut) | 0.46 | ||
| SD300Z [Offset] | 1.0 ~ 3.0 | 360 ~ 890 | E (only D-cut) | 0.46 | ||
| SDA05N | 1.0 ~ 5.0 | 400 ~ 1,000 | A / E (only D-cut) | 0.68 | DC 24V | SDC-40 |
| SDA09N | 1.5 ~ 9.0 | 300 ~ 1,000 | A / E (only D-cut) | 0.69 | ||
| SDA18N | 4.0 ~ 18 | 300 ~ 900 | 0.75 | A | ||
| SDA28N | 5.0 ~ 28 | 190 ~ 780 | 0.75 | A |
Bit Socket
Dimension
Controller for Electric Screwdrivers SEHAN – SD series
Specification
| No | Item | Spec | |||
|---|---|---|---|---|---|
| 1 | Model | SDC-24 |  |
SDC-40 |  |
| 2 | Input | AC 120V or AC 230V, 50/60Hz, 2.0A | AC 120V or AC 230V, 50/60Hz, 3.0A | ||
| 3 | Output | DC24V, max5.0A | DC40V, max5.0A | ||
| 4 | Fuse | AC250V, 6.3A | AC250V, 10A | ||
| 5 | Dimension / Weight | refer to the drawing | |||
| 6 | Preset Parameters | Torque, Speed & Angle in 8 preset numbers | |||
| 7 | Select the preset no. | 1) Front panel button 2) 25P I/O interface 3) 8 direct sensor connecting port |
|||
| 8 | Torque Calibration | From -10% to +10% | |||
| 9 | Auto detection of the connected driver |
Auto detection of the offset value from the EEP-rom on the driver | |||
| 10 | Error Display | Error display by code no. in system, communication & pattern error group | |||
| 11 | Fastening qulity control | OK/NG monitoing of screw fastening by preset pattern of angles, times | |||
| 12 | Screw Counter | Saving the total screw number and monitoring the number of OK fastening screws. | |||
| 13 | Monitoring and Parameter | Monitoring and parameter setting on the PC program(Ms Windows base) Smart-manager or front pannel |
|||
| 14 | Communication port | USB or RS232C | |||
Dimension
PC communication software, Smart Manager
The PC software, Smart manager is convenient to set the parameters and monitoring the fastening data including angle, torque, speed, etc.
Parameter setting on Smart-Manager
1) Fastening setting
2) Profile of fastening process
3) Advanced Fastening process
4) Counter setting
5) Multi Sequence setting
6) Driver ++ setting
Monitoring on Smart-Manager
1) Real-time Monitoring Data
2) Real-time Torque or Angle curve
3) Screw Counter – single
Produt Component
Standard Item
Option Accessories
Reviews
There are no reviews yet.